How to Reset Toyota 4Runner Maintenance Light [2003 – 2021]
If you are a Toyota 4Runner owner and have noticed that the maintenance light is ON, then there is no need to panic. Resetting the light is a relatively simple task that can be done quickly right in your own garage. In this article, we will cover exactly how to reset Toyota 4Runner maintenance light and explain why it is important to do so regularly.
In a nutshell, to reset the maintenance light on a Toyota 4Runner. First you need to turn ON the ignition switch, set the display to “ODO” mode, then turn OFF the ignition switch and hold the “RESET” button while turning ON the ignition switch. You will see that your maintenance light has been fixed.
How to Reset Toyota 4Runner Maintenance Light [Step by Step]
In this section we will share step by step how to reset the Toyota maintenance light so that you can easily understand the entire process. Let’s see.
Step 1: Turn the ignition ON.
At first you need to turn ON the ignition switch.
Step 2: Press the odometer button
On your dashboard, you will find an odometer button (This switch is typically located near the steering wheel.) set the display to “ODO” mode, then turn OFF the ignition switch. After that, hold down the “RESET” button for a few seconds while turning the ignition switch ON. (Approximately 10 seconds are usually needed to complete this process.)
Step 3: Release the RESET button
After the maintenance light starts flashing, release the RESET button. Then you will see that the maintenance light turns OFF, which means the maintenance light reset process was successful.
Step 4: Verify the reset.
Finally, for confirmation, you will need to turn OFF the ignition and then turn it back ON again. If the maintenance light does not appear again, it indicates that the reset succeeded.
How to reset the maintenance light ON Toyota 4Runner? [Alternative method]
Our above steps may not work on some Toyota 4Runner models. Don’t worry; there is an alternative way to reset the maintenance light for these Toyota 4Runner models. Take a look at the video below for a better understanding of the process. Hopefully it will help you a lot.
Why does the maintenance light go ON? Is it safe to drive with the maintenance light ON?
Maybe you wonder whether driving with the maintenance light ON is safe. You will be happy to know that if the maintenance light is ON on your Toyota 4Runner, there is nothing to worry about.
It is important to remember that the maintenance light on your engine is a reminder that your engine’s oil may be old, dirty, or is no longer capable of protecting the engine from friction caused by the wear and tear caused by overheating. So you need to replace your engine oil.
If you keep checking coolant, power steering fluid, and brake fluid over time, and replace them as necessary, you won’t have to worry about the maintenance light being ON.
What should I do if I cannot reset the maintenance light on my Toyota 4Runner?
If you’re having difficulty resetting the maintenance light on your Toyota 4Runner, consult your owner’s manual for detailed instructions. If you’re still unable to reset the light, take your vehicle to a certified Toyota dealer for assistance.
Conclusion: Maintenance Light Reset Complete
Hopefully, this comprehensive guide on how to reset Toyota 4Runner maintenance light has helped you a lot. We have tried our best to simplify it for you and also shared alternate ways so that you can take another route in case.
